|
| |
Engine panel
click for large picture |
click for large picture |
Engine panel; all gauges connected to FS and calibrated
|
Backside of the engine panel. Three USB servo cards assembled between
two Plexiglas panels. |
| |
|
|
3 mm thick Aluminum sheet (including first layer coating). |
Testing the Opencockpits
USBservo controller card |
|
Painted panel |
Servos for the simkit
gauges
|
|
Simkit
gauges assembled in panel (excluding screws and center cover), not
calibrated yet.
|
|
|
